Select Page

Leaf Chain

Leaf chains consist of pins and plates only and therefore are increased in strength than roller chains. They can be appropriate for tasks like hoisting and pulling. Leaf chains conform to ANSI and also have two types: AL and BL.
AL type
To the use that static load is applied with tiny concern of wearing.
BL sort
For that use that put on resistance is needed given that affect load is utilized.
Selection of leaf chains
The chain dimension is selected in accordance to your following formula:
Acting tension?¨¢Service factor¡§QMaximum allowable tension Notes:
1. Acting stress includes the dead fat of the chain, the excess weight in the attachments and inertia.
two. Should the chain pace exceeds 30 m/min, use a roller chain.
Minimum sheave diameter: S.D = Chain pitch?¨¢5
Minimum width between flanges: L = All round length of pin?¨¢1.05
?If connecting pins are presented: L¡§R2L1?¨¢1.05
F.D = S.D + Greatest website link plate height (H) Note:?If dimension H exceeds 25.four,
F.D = S.D + 25.4 could be adopted because the minimum flange outer diameter.
Periodical inspection and directions for replacement
You’ll want to perform periodical inspection and lubrication to verify security and prolong chain life. Difficulties and directions for solution are outlined from the following.
Challenge:Circumferential wear of plate
Option:Exchange the chain if wear reduction turns into five percent of H.
Difficulty:Oblique dress in of plate and pin head
Solution:Align the unit.
Issue:Abnormal protrusion or rotation of pin head
Alternative:Replace the chain Lubricate and reduce overload.
Issue:Put on elongation
Solution:Substitute the chain when its length gets one.03L. Note: Wear elongation of the
chain lowers its tensile strength.
Dress in elongation of 3% lowers the tensile strength by 18 percent.
The wear lifestyle of chain is often enhanced by lubrication. Replace the chain.
Problem:Cracked plate (1)Crack: Through the hole of the link plate toward the finish of the hyperlink plate while in the path perpendicular to stress course.
Alternative:Exchange the chain which has a chain of larger greatest allowable stress, or reduce the load or dynamic (shock) load.
Challenge:Cracked plate (two)Crack: In an oblique direction towards stress course.
Answer:Exchange the chain, and safeguard from corrosive situations.
Problem:Broken plate(by substantial tension)
Solution:Exchange the chain, and eliminate the trigger of overload.
Trouble:Enlarged plate hole
Alternative:Substitute the chain, and do away with the trigger of overload.
Difficulty:Corrosion of pit
Resolution:Replace the chain, and defend from corrosive circumstances.


Recent Posts


As one of leading worm reducer manufacturers, suppliers and exporters of mechanical products, We offer worm reducer and many other products.

Please contact us for details.


Manufacturer supplier exporter of worm reducer.