Select Page

General Description
Equiped that has a reversible motor, a bidirectional gear pump, double P.O. checke valves, relief valves in addition to a tank, this power unit can drive a double acting cylinder to lengthen and retract with no directional solenoid valve. It is typically utilized in recre-ational vehicles, pleasure boats and transportable phases, etc.
Unique Notes
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean each of the hydraulic parts concerned prior to set up of the electrical power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst, which should really also be clean and free of charge of impurities. N46 hydraulic oil is recommended.
4. The energy unit shown is created to be mounted horizontally.
five. Oil changing is required following the preliminary a hundred operation hrs, afterwards as soon as each and every 3000 hours.
6. Check the oil degree from the tank right after the initial running of the electrical power unit.