Select Page

Using Chain Beneath Distinct Temperature

For Use at Low-temperature
When employing conveyor chains at low-temperature such as in a fridge or inside a cold atmosphere, the next ailments could happen.
1) Very low temperature brittleness
Generally, a materials is embrittled at low-temperature and shock resistance is lowered. This phenomenon is called low-temperature brittleness, and also the degree of embrittlement differs from materials to material.
The service limit of the conveyor chain is determined by its specifications.
2)Influence of freezing
At low-temperature, bending failure, roller rotation failure, repairing of chain, and so on. may very well be brought on through the freezing of penetrated water or deposited frost during the clearance concerning pins and bushings, bushings and rollers or inner plates and outer plates. These conditions trigger an overload to act within the chain and drive, diminishing the daily life of your chain.
To prevent freezing, generally, it’s encouraged to fill the clearances with a low-temperature lubricant appropriate on the service temperature to prevent water, frost, and so forth. from penetrating the respective portions in the chain. For lubrication, a silicon primarily based grease is advisable.
For Use at High-temperature
Chains power is diminished by high-temperature ambiance, direct conveying of high-temperature loads, or radiated heat, and so on. The service limit at high-temperature depends not over the temperature from the service surroundings however the temperature and materials on the chain entire body.
Following circumstances may come about when chains are employed at high-temperature:
one) High temperature brittleness and fracture by lowered hardness of heat taken care of material
two) Brittleness brought about by carbide precipitation
3) Abnormal put on by scale
four) Fatigue fracture triggered by repeated thermal shock (cooling and expansion)
five) Abnormal wear due to a rise within the coefficient of friction
six) Creep fracture
7) Fracture as a result of thermal fatigue of welded place
8) Effects induced by thermal growth
?Stiff back links and rotation failure resulting from decreased clearance ?Fatigue fracture because of lowered fitting force
9)Lubrication failure and stiff backlinks due to deterioration and carbonization of lubricating oil
Grease excellent in heat resistance involve those depending on silicon, graphite or molybdenum disulfide.
For use at high-temperature, high-temperature resistance bearings and stainless steel bearings are encouraged.


Recent Posts


As one of leading worm reducer manufacturers, suppliers and exporters of mechanical products, We offer worm reducer and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of worm reducer.